NETGEAR R6350 User Manual page 64

6. Select an access rule:
• Allow all new devices to connect. With this setting, if you add a new device, it can access your
network. You don't need to enter its MAC address on this page. We recommend that you leave this
radio button selected.
• Block all new devices from connecting. With this setting, if you add a new device, before it can
access your network, you must enter its MAC address for an Ethernet connection and its MAC
address for a WiFi connection in the allowed list.
The access rule does not affect previously blocked or allowed devices. It applies only to devices joining
your network in the future after you apply these settings.
7. To view allowed or blocked devices that are not connected, click one of the following links:
• View list of allowed devices not currently connected to the network
• View list of blocked devices not currently connected to the network
The list displays.
8. To allow the WiFi-enabled computer or mobile device you're currently using to continue to access the
network, select the check box next to your computer or device, and click the Allow button.
9. Click the Apply button.
Your settings are saved.
AC1750 Smart WiFi Router Model R6350
Control Access to the Internet
64