Table of Contents
Advertisement
15 Troubleshooting
If GoGear Opus is not working properly or the
display freezes, you can reset it without losing
data:
How do I reset GoGear Opus?
Insert a pen tip or other object into
the reset hole located at the bottom of
GoGear Opus. Hold until the player shuts
down.
If the reset option is unsuccessful, follow
the steps how to recover GoGear Opus
with the Philips Device Manager:
1
On your computer, select Start >
Programs > Philips Digital Audio Player
> Opus Device Manager > Philips
Device Manager to launch the Philips
Device Manager.
2
Turn off GoGear Opus before you
continue.
3
Press and hold the volume button
while you connect GoGear Opus to your
computer.
4
Keep holding the key until the Philips
Device Manager acknowledges GoGear
Opus and enters the recovery mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect GoGear Opus from your
computer.
7
Restart GoGear Opus.
EN
33
Advertisement
Table of Contents
