Motorola MOTOPURE H series Getting Started Manual

congratulations!
Congratulations! Congratulations on your purchase of the cool
™ ®
MOTOPURE Hxx Bluetooth Handsfree Headset.
Instead of traditional microphone technology, your
™
MOTOPURE Hxx captures bone vibrations in the
ear canal when you talk and transforms them into
audible sound while reducing background noises in
the environment.
Whether you use one or two phones, the
™
MOTOPURE ™
MOTOPURE Hxx can also connect to both
simultaneously. With the use of voice prompts,
Hxx (Shasta)
operating your headset is easy.
First follow the easy steps in this guide to get your
handsfree headset charged and talking to your
phone. Then learn how to wear and use your
handsfree headset with this handy guide that's easy
to take along with you.
If you'd like even more information about how to use
™ ®
your new MOTOPURE Hxx Bluetooth Handsfree
Headset, visit www.motorola.com/Bluetoothsupport.
Getting Started Guide
So, let's go!
Caution: Before using your headset, read the
important safety and legal information pamphlet and
follow its instructions.
put it on
Motorola, Inc.
Motorola, Inc.
Consumer Advocacy Office choose an ear
Consumer Advocacy Office
1307 East Algonquin Road
1307 East Algonquin Road
Your headset comes ready for the right ear. To
Schaumburg, IL 60196
Schaumburg, IL 60196
change for the left ear:
www.motorola.com
1 2
www.hellomoto.com
1-877-MOTOBLU
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
hearing impaired)
Guide Number: 68000201945-A (DRAFT 1)
Guide Number: 6809500A86-O
wear it
1
Insert headset earpiece into your ear canal.
Bluetooth QD ID:Bxxxxxx
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2009 Motorola, Inc. All rights reserved.
your headset
Earhook
Speaker and
Bone Conduction
Microphone
Charging
Port
Volume
Buttons
Power
Switch
Call
Button
Crystal Talk
Indicator Microphone
Light
Microphone Mode Button
basics
2
Ensure bone conduction microphone is in turn on & off
contact with your ear canal.
Slide the Power switch. When the headset is turned
on, no orange is shown under the switch.
check battery level
Microphone
Press both Volume buttons while not on a call.
indicator voice prompt available talk time
light
Red "battery level is less than 2 hours
Ear canal
low"
Yellow "battery level is between 2 and 4.5
3
Flex the ear hook and loop it over your ear.
medium" hours
Green "battery level is more than 4.5
high" hours
turn voice prompts on & off
Press either Volume button and the Call button while
not on a call. You hear the current voice prompt
status ("voice prompt on" or "voice prompt off").
Tip: For optimal audio performance and comfort, be
sure to point the headset as shown.
charge it pair & connect
You'll need to charge your headset before using it. charging battery Once charged, get your headset connected to up to pairing and connecting
Plug the charger into the charging port on your two phones.
headset and a wall outlet.
connect with your first phone
"phone 1"
1
Turn off any Bluetooth devices previously paired
(linked) with your headset.
2
Turn on the Bluetooth feature on your phone.
3
Turn on your headset by sliding the Power
switch to ON (orange not showing).
The indicator light becomes steadily lit in blue
and you hear "ready to pair".
4
Follow voice prompts to connect your phone to
The indicator light will turn red or yellow while
your headset.
charging. When the battery is fully charged, the
When your headset successfully pairs with your
indicator light turns green.
phone, you hear "pairing complete". When
Disconnect the headset from your charger when
connected, you hear "phone 1 connected" and see
charging is complete.
the indicator light rapidly flash in red and purple.
Note: Your battery is designed to last the life of your
headset. It should only be removed by a recycling
facility. Any attempt to remove or replace your
battery will damage your headset.
receive calls make calls
When you receive a call, the indicator light flashes in make a voice dial call
\
blue (for phone 1) or purple (for phone 2), and you
1
Press the Call button and you hear "voice dial" .
hear call on phone 1 (or "phone 2") and a ringtone
You are prompted on how to make the call:
over your headset.
• "press Call button for phone 1"
answer a call
• "press Call button and either Volume
Press the Call button.
button for phone 2"
reject a call 2
Press the button(s) as prompted. For phone 2,
make sure to press the Call button and either
Press and hold either Volume button. You hear "call
Volume button at the same time.
ignored" .
3
After the tone, clearly speak the name of the
contact you want to call.
redial last call
1
Press and hold the Call button and you hear
"last number redial" . You are prompted how to
make the call:
• "press Call button for phone 1"
• "press Call button and either Volume
button for phone 2"
2
Press the button(s) as prompted. For phone 2,
make sure to press the Call button and either
Volume button at the same time.
connect with your second phone am i connected?
"phone 2" (optional)
To confirm connection to your phones:
1 1
Turn off first phone and any other Bluetooth Place the headset over your ear (see "put it on"
devices previously paired (linked) with your
for help).
headset.
2
One phone at a time, dial the number you want
2
Turn your headset off by sliding the Power to call and press Call or Send key on your
switch to OFF (orange showing).
phone.
3
Turn on the Bluetooth feature on your phone.
If your phone and headset are successfully
4 paired, you will hear ringing on the headset.
Turn on your headset by sliding the Power
switch to ON (orange not showing).
will I need to do this every time?
The indicator light becomes steadily lit in blue.
5 No. After initially pairing your phone(s) and headset,
Follow voice prompts to connect your phone to
you don't need to do it again.
your headset.
For daily use, just make sure that your headset is ON
When your headset successfully pairs and connects
and that your phone's Bluetooth feature is ON. Your
with your phone, you hear "pairing complete".
headset and phone will connect automatically!
When connected, you hear "phone 2 connected"
and see the indicator light rapidly flash in red and
purple.
while on a call headset status
mute & unmute a call
indicator light status
Press and hold both Volume buttons until you hear
Off Power off
"mute on" or "mute off".
Three blue flashes Powering on/off
end a call
Steady blue Pairing mode
Press the Call button. If a call is on hold, you hear
"phone 1 (or "phone 2") audio retrieved" and the Quick blue flash Incoming call on
call is reconnected to your headset. phone 1
second incoming call Quick purple flash Incoming call on
phone 2
• To answer, press the Call button. You hear
"phone 1 (or "phone 2") audio placed on Slow blue pulse On a call
hold" and the active call is placed on hold.
Slow blue flash Standby (connected to
• To ignore, press and hold either Volume button
one phone)
until you hear a tone.
Slow green flash Standby (connected to
• To retrieve a call on hold, press the Call button.
two phones)
You hear "retrieve held call", then "press Call
Slow red flash Idle (not connected to
button for phone 1" and "press Call button
any phone)
and either Volume button for phone 2" .
Slow purple pulse Call muted
Press the button(s) as prompted. For phone 2,
make sure to press the Call button and either Quick red flash Low battery
Volume button at the same time.
turn bone conduction feature on & off
Press Noise Reduction button while on a call. You
hear the current feature status ("bone conduction
on" or "bone conduction off").
problems?
My headset will not enter pairing light is steadily lit in blue. Then follow the pair &
connect instructions in this guide.
mode.
Make sure that any devices previously paired with My headset connected before, but now
your headset are turned off. If the indicator light is
it's not.
flashing in blue, first turn off the other device, then
turn the headset off and on. The indicator light Make sure the indicator light on your headset is
steadily lit in blue when your phone is searching for
becomes steadily lit in blue and you hear "ready to
pair". devices. If not, press and hold the Call and both
Volume buttons until you hear "ready to pair" and
My phone doesn't find my headset see the indicator light steadily lit in blue.
when searching.
Support.
If you need more help, contact us at
Make sure the indicator light on your headset is
steadily lit in blue when your phone is searching for 1-877-MOTOBLU or visit us at www.motorola.com/
Bluetoothsupport.
devices. If not, press and hold the Call button and
both Volume buttons until you hear "ready to pair"
and see the indicator light steadily lit in blue.
My headset will not pair with my
phone.
If the indicator light is not steadily lit in blue when
your phone is searching for your headset, you can
reset the headset by pressing and holding the Call
button and both Volume buttons until the indicator