Config Menu - ABB CDD Product Manual

C
ONFIG menu
Selecting Config on the menu bar gives access to eight drop-down menus.
Config > Plant: used to modify plant information including plant and location name, address,
latitude, longitude, time zone, and country standard.
Config > Network: provides basic information of the connected network.
Config > Date/Time: used to adjust date and time.
Config > CDD clone: allows configuration of a new CDD with the same settings as a previous
CDD by using the last 4 pairs of digits of the old CDD's MAC address.
Use the drop-down list to
view grid/country standards
Click confirm to
make changes
- 38 -
6 - System monitoring
Click to view a drop
down list of timezones