Axis 213 PTZ User Manual page 24

AXIS 213 - Configuring the PTZ Network Camera
24
Image Settings
• Auto focus enabled (default setting)
• Noise reduction - sets the level of noise reduction in the image. i.e. sharpens
the image. Setting the noise reduction to 'high' will cause a drop in frame
rate (fps)
Image Offset
To eliminate a black border or black lines on the image on the live view page, change
the horizontal or vertical position of the image by changing the X offset and Y Offset
values.
Please use the online help files
Audio
You can customize the audio
settings to suit your requirements.
Go to Setup | Audio to open the
configuration page for audio.
Select Enable Audio and select the
Audio mode according to your
application. This can be:
• Full-Duplex
• Half-Duplex
• Simplex - Talk
• Simplex - Listen
Enter the max number of clients
that will be able to access the
application at any one time. Use
this setting to limit access if you
have limited bandwidth.
Send the sound from the active client to all other clients - if you are using
Half-Duplex mode, this option can be used to send audio from the client currently
transmitting to all the other clients, and not just to the server end.
for more information.