Nokia 6012 User Manual page 14

2. Slide the back cover toward the bottom of the phone and remove.
Remove the battery
After you have removed the back cover, insert your
finger into the finger grip, and lift the battery from
its compartment.
UIM (CDMA SIM) card slot
Your phone has a UIM (CDMA SIM) card slot built into the mechanics. However, the UIM
(CDMA SIM) is not functional in this phone model. Avoid placing anything into the UIM
(CDMA SIM) card slot.
Install the UIM (CDMA SIM) card
The user identity module (UIM), also called the CDMA subscriber identity module (SIM),
card and its contacts can be easily damaged by scratches or bending, so be careful when
handling, inserting, or removing the card.
Before installing the UIM (CDMA SIM) card, always make sure that the phone is
switched off and that you have removed the cover and battery.
Keep all UIM (CDMA SIM) cards out of the reach of small children.
Insert the UIM (CDMA SIM) card into the holder
(beveled corner last) with the gold-colored contacts
facing down, matching up with the gold-colored
contacts on the phone.
Replace the battery
1. Position the battery so the positive and
negative indicators on the battery match up
with the positive and negative indicators on
the phone.
The battery label should be facing away from
the phone.
2. Insert the battery, gold-colored contact end first, into the battery slot.
14 Copyright © Nokia 2004