Axis 210/211 User Manual page 41

Connect input/output devices to the terminal connector as follows:
1. Loosen the corresponding screw on top of the pin (see above for the correct pin to
use).
2. Push the cable into the connector and secure it by fastening the screw.
3. Once devices are connected, connect the terminal connector to the camera,
making sure that all cables are securely fastened.
Schematic Diagram - Terminal Connectors
Switch
3.3V
Mode
Power
Supply
AXIS 210/211 camera
AXIS 210/211 - The I/O Terminal Connector
+
o
PS-K 9V
o
2
o
e.g. push
1
GND
o
3
o
4
o
Relay
o
o
o
Device
o o
43