Control Panel; Before Use; Using The Freezer; To Start The Freezer And Thermostat Control4 - Electrolux EU8216C Instruction Booklet

Control Panel

A. Red warning light
Lights when one of the alarms in the cabinet has
been triggered.
B. Yellow indicator light
Illuminates when Fast Freeze is operating.
C. FAST FREEZE button
Used to switch the Fast Freeze feature on and off.

Before use

·
Remove all securing tapes.
·
Wash the inside of the appliance with lukewarm
water with a little bicarbonate of soda added (5ml to
0,5 litre of water). Do not use soap or detergent as
the smell may linger. Dry the appliance thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax,
polishes or products containing alcohol.

Using the freezer

To start the freezer and thermostat
control
Turn the thermostat control to the desired position.
MIN The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
MAX The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
H : Switched off.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.

Temperature inside the freezer

To ensure that foodstuff will keep for a long time, be
sure that the temperature inside the freezer is -18°C
or below. Please note, however, that the energy
consumption increases as the temperature decreases.

Switching off

Turn the control anti-clockwise past the click
position to "H".
Unplug the power supply plug from the wall socket.
E
A B C D
4
D. Green indicator light
Illuminates when the freezer is operating.
E. Thermostat control
Use to switch on and set the desired temperature in
the freezer.
·
Before inserting the power plug into the outlet and
switching on the cabinet for the first time, leave it
standing upright for about 30 minutes, or for 2 hours
if it was transported horizontally. Otherwise the com-
pressor may sustain damage. This time will allow the
oil sufficient time to return to the compressor.
GB
GB
Electrolux 818 14 99-04/0