Download Print this page

Troubleshooting - Matsui MFC100 User Manual

Advertisement

Getting to know Your Chopper
Fig. 1
B
C
D
E
Description of the Appliance
A Lid
E HI Pulse
B Lid Locking Tabs
F Bowl
C Chopping Blade
G Drive Shaft
D LO Pulse
H Base Bowl Tabs
Caution: Never use the chopper without a lid.
Using your Food Chopper
A
fig. 2
F
G
H
fig. 4
Important: Only add small amounts of liquid into
the chopper, large quantities may leak from the
container.
Assembling the food chopper
Remove all packing materials before using.
Before using, wash Lid, Blade and Bowl in warm soapy water;
rinse and dry thoroughly.
Place the Base on a dry, stable surface.
Place the Bowl, without Lid and Chopping Blade, on the Base
and turn clockwise to lock into position (fig.2)..
Slide the Chopping Blade down over the shaft, rotating if
necessary to drop into place (fig. 3).
Place the Lid on the Bowl, then turn clockwise into Lid locking
slot (fig. 4).
Note: For your protection, this unit has a safety lock lid. The unit
Operating the food chopper
fig. 3
Cut food into approximately 1/2 inch pieces and place up to 2
cups of dry food in the Bowl at a time
.
Place the lid on the Bowl and turn to lock into place.
Plug the cord into an outlet. Press and hold the HI or LO Pulse
button for 5-10 seconds and then release; the motor will stop.
Repeat for a finer consistency.
Hold the unit with one hand placed on top of the lid, to keep the
unit steady.
When finished chopping, allow Chopping Blade to stop rotating
before removing contents.
Remove the Lid and grasp the stem of the Chopping Blade.
Carefully remove it from the Bowl. Remove the Bowl from the
Base and empty the processed food.
Note: Do not use Bowl for storing food..
If the food chopper doesn't work please check:
the power is switched on.
the fuse in the plug.
the lid is fitted correctly.
-3-
will not operate unless the Lid and unit dot align. Do not
attempt to operate the unit without locking the Lid in place.
Important: Do not exceed the maximum
capacity!
Important: Most food requires only 3-10 seconds. Do not
operate longer than 1 minutes.
Important: Blades are sharp, handle with care.

Troubleshooting

Advertisement

loading