Removing The System Board - Philips M3001A Service Manual

Disassembly for the Monitor
Step 11 Remove the four screws from the rear panel:
Step 12 Slide the chassis slowly out from the front of the housing (the battery compartment

Removing the System Board

To remove the System Board, do the following:
Step 1
Step 2
224
cover must be open), and lay the chassis on the Monitor Bezel
For Monitors with a Wireless LAN Assembly: To avoid antenna damage, slide
the chassis very carefully out from the front of the housing, disconnect the antenna
cable and lay the chassis on the Monitor Bezel:
Remove the Power Supply as described previously in this chapter.
Remove the chassis as described previously in this chapter.
1
Repairing the Instrument