Technical Informations; Dimensions And Technical Data - Ferroli GE3 Installation, Service And User Instructions Manual

GE3

1. Technical informations

1.01 Introduction
GE3 boiler is a new heating generator with high effi ciency,
for central heating system suitable for burners using oil
or gas.
The boiler body is built by cast iron sections joined togheter
by mean of biconical nipples and tie rods. Sections fi ns
are especially developed to achieve the best effi ciency
of the boiler in order to save on fuel consumption. The
boiler body insulation is provided by mineral high density
fi bers that minimizes the body heat lost.
Key
1
1 Control thermostat
2
2 Security thermostat manual resetting
3
3 Thermometer
Fig. 1
1.02 Control and securities devices operation
Regulating thermostat, manual resetting 3 (fi g. 1)
It operates when the boiler temperature, during the heating mode reach such a level that can use a danger situation.
Before resetting this thermostat ask for Qualifi ed Serviceman to inspect the appliance.
Control thermostat 1 (fi g. 1)
It allows to control the boiler temperature by mean of its knobs.
This thermostat controls the burner.

2. Dimensions and technical data

2.01 Flue gas path
3
Cod. 3540Z970 - 09/2011 (Rev. 00)