Alignment And Adjustments - Samsung SP54T6HF1X/BWT Service Manual

1. Alignment and Adjustments

1-1 When entering the service mode;
1. Turn on the TV, and then select "DYNAMIC" on the picture adjustment mode.
2. Turn off the TV(STAND-BY).
3. Enter the service mode by pressing the remote control keys in the following sequence:
Display -> Menu -> Mute -> Power ON
Note : If necessary, re-do steps 1~3.
Initial display when the service mode is switched.
1-1-1 WHEN A RF SIGNAL IS RECEIVED
MODEL((T_CM2P06_002)
DEFLECTION
VIDEO ADJUST 1
VIDEO ADJUST 2
VIDEO ADJUST 3
VIDEO ADJUST 4
OPTION (87h 05ch)
YC DELAY
RESET
T_CM2906_002 yy.mm.dd
1-1-2 SERVICE MODE CONTROL KEYS
MAIN MENU
UP / DOWN
RIGHT / LEFT
PRECAUTIONS
1. When EEPROM IC (IC902) is replaced, first connect the power cord and wait for about 4~5 seconds.
2. After replacing EEPROM IC (IC902), enter the Service mode. Next, enter the standard data or the
previous EEPROM IC data before replacement. And then check and adjust any items related to
Geometric, Picture, Option.
Samsung Electronics
MENU DISPLAY
Select item by moving cursor
Decrease or increase the adjustment values
MODEL(T_CMDEAC_XXX)
DEFLECTION
VIDEO ADJUST 1
VIDEO ADJUST 2
VIDEO ADJUST 3
VIDEO ADJUST 4
OPTION (EF 8E 2E)
YC DELAY
RESET
T_CMDEAC_XXX yy.mm.dd
[Navigation Key]
Alignment and Adjustments
1-1