JVC EXAD KW-ACX810 Instruction Manual page 56

Menu items
1
Down Mix *
D. (Dynamic) Range
Compres. (Compression) *
2
AV Input *
3
Camera Input *
4
External Input *
1
* Selectable only for "DISC", "SD", and "USB." (Playback stops when you change the setting.)
2
* Not selectable when "AV-IN" is selected as the source.
3
* The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitor panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
4
* Not selectable when the component connected to the CD changer jack is selected as the source.
5
* The name of the component detected through the CD changer jack is shown.
Selectable settings, [reference page]
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
Dolby Surr. : Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo : Normally select this.
You can enjoy a powerful sound at a low volume level while playing
1
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
You can determine the use of LINE IN and VIDEO IN terminals. ☞ [47]
Off: Select when no component is connected ("AV-IN" is skipped while
selecting the source).
iPod (Off): Select when connecting the iPod using the USB Audio and
Video cable for iPod. ☞ [43]
Audio&Video: Select when connecting an AV component such as a VCR.
Audio: Select when connecting an audio component such as a portable
audio player.
Navigation : Select when connecting a Navigation System.
Off: Select when no rear view camera is connected to the CAMERA IN plug.
On: Select when connecting the rear view camera to the CAMERA IN plug.
The picture from the camera is displayed as it is taken.
• While the pictures through the camera are shown on the monitor, no
message will be displayed.
For connecting an external component to the CD changer jack on the rear.
: CD changer or iPod. ☞ [41, 46]
5
Changer/iPod *
External: Any other than the above. ☞ [49]
• For connecting the Bluetooth adapter, this setting is not required. It is
automatically detected.
56
Initial:
Underlined