Advertisement
Dolphin
Status LED
Indicates On/Off Status, and
flashes to indicate system faults.
On/Off Switch
Toggles the system on or off.
Drive Program Display
A 7-segment display shows the
currently selected drive program.
Remote Status LED
Indicates status of Dolphin Remote.
Drive Program Select Switch
This switch will scan through and
select one of five drive programs.
Hazard Light Switch & LED
Press to make both indicators flash
simultaneously. Press again to turn off.
LED flashes when activated.
Figure 1. Dolphin Components and Connections
Basic Operation Instructions
Battery Gauge
A series of ten LEDs, which
indicate charge level
Magnetic Key Lock & LED
Locks DX System to prevent unauthorized use. Upon reactivation of
unit, LED will flash until magnetic key is used to unlock system.
Battery Connection Socket
Connects to Battery Charger Plug.
DXBUS Sockets
Enables DXBUS cable to be used
to interconnect to the remainder of
the DX System.
Left & Right
Indicator Switches & LEDs
Press the appropriate switch to activate
turn indicator. Press again to turn off.
LED flashes when activated.
Horn Switch
Press to activate warning horn.
Light Switch & LED
Toggles the head/tail/side lights on or
off. LED is lit when activated.
seat height
leg rest adjust
(right & left)
Actuator Select Switches
5 switches for actuator selection. Not used for
actuator operation, only selection. LED above
switch lights up when activated.
Joystick
Controls the speed and direction of
power chair, as well as actuator
control when selected.
Magnetic Key
Used to lock and unlock
the DX System.
BACK VIEW
5
back tilt
seat tilt
Advertisement
