D-Link DIR-869 User Manual page 64

Section 4 - Coniguration
5GHz
Enable or disable the 2.4GHz wireless network.
Status:
Create a name for your wireless network using up to 32 characters.
Wi-Fi Name (SSID):
Create a password to use for wireless security.
Password:
Advanced Settings
Choose None, WEP, or WPA/WPA2-(Personal) (recommended).
Security Mode:
Select the desired wireless networking standards to use. The available
802.11 Mode:
options are Mixed 802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only,
Mixed 802.11a/n, Mixed 802.11n only, or 802.11a only
Select the desired channel. The default is Auto (recommended).
Wi-Fi Channel:
Select the desired wireless transmission power.
Transmission
Power:
These options will change depending upon the selected 802.11 Mode.
Channel Width:
Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a
devices, select Auto 20/40 if you are using 802.11n and 802.11a
devices, or select 20 MHz if you are only using 802.11a devices.
The default setting is Visible. Select Invisible if you do not want to
Visibility Status:
broadcast the SSID of your wireless network.
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to page 76 for more information.
Click Save when you are done.
D-Link DIR-869 User Manual 60