Using The Hdmi Control; Using The Hdmi Control Functions - Pioneer Kuro PDP-LX609A Operating Instructions Manual

13

Using the HDMI Control

Chapter 13
Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player or AV system that
support the HDMI Control functions using the remote control of the flat screen
TV.
The HDMI Control functions include playback of content using on-screen control
panel on the flat screen TV, recording of a TV programme while watching, timer
recording using a programme list on the connected recorder, and confirmation
of timer recording registered in the recorder. For details, see the table below.
Note
• The KURO LINK function name used on the web and in catalogues is referred
to as HDMI Control in the operating instructions and on the product.
• Maximum number of devices that can be connected and controlled using the
remote control unit of the flat screen TV is as follows: recorder x 2, player x 2
or AV system x 1.
• Not all device operations may be available for HDMI Control functions.
HDMI Control functions
Function Description
Playback of The proper input source is automatically
content
selected and the content is played back on the
flat screen TV as you press PLAY on the
connected device
On-screen Recorder/player operation can be controlled
control
on-screen or with the remote control unit of
the flat screen TV (play, stop, fast forward/
reverse, etc.)
Recording of
The programme now watching can be
TV
recorded using the remote control unit of the
programme
flat screen TV
Timer Timer recording using a programme list on
recording
the recorder connected
Confirmation Recording schedule registered in the recorder
of recording
can be displayed and confirmed on the screen
schedule
using the remote control unit of the flat screen
TV
Display Information on the display menu language is
Language
transferred to the recorder or player
Setup
connected to the flat screen TV. For details,
see the operation manual that came with the
recorder or player.
AV system Receiver/amplifier operation can also be
control
controlled with the remote control unit of the
flat screen TV (volume, surround mode and
input selection of the HDMI terminal)
Power On
The connected recorder can be turned On
when the flat screen TV is turned On.
The flat screen TV can be turned On when the
connected recorder(s) or player(s) is turned
On and images are input to the flat screen TV.
Power Off The connected device(s) can be turned Off
when the flat screen TV is turned Off
68
En
Note
• When using the HDMI Control functions, operate the remote control unit
Usable
while pointing it toward the remote control sensor (t) located at the bottom
devices
right of the front panel of the flat screen TV.
Recorder/
• You cannot use two or more HDMI terminals at the rear of the flat screen TV
player
at the same time except "Power Off" and "Display Language Setup" functions.
On-screen control panel
Recorder/
For an AV system
player
HDMI Control
****
1
SURROUND+
Recorder
INPUT-
2 2
SURROUND-
Recorder
3
Exit
Recorder 4
Press  or  on the remote control unit of the flat screen TV to switch the
surround mode in order or in reverse order,  or  to switch the input source in
order or in reverse order. Pressing HDMI CONTROL closes the control panel to
return to the HDMI Control menu.
Recorder/
player
Note
• You cannot operate the recorder/player when you press  or  to switch the
input source during operation. To resume the operation, return to the HDMI
Control menu and select the desired function again.
AV system
For a recorder
HDMI Control
Recorder
****
1
Recorder/
player
2 2
3
Recorder/
Exit
player/AV
system
4
Press  or  on the remote control unit of the flat screen TV to select fast
reverse or fast forward mode,  to skip commercials or  to stop playback.
Pressing ENTER starts playback and HDMI CONTROL closes the control panel to
return to the HDMI Control menu.
• Press i+/– or e to adjust volume
for the AV system.
• Press , , , , ENTER, RETURN
) colour (RED, GREEN, YELLOW,
(
BLUE) or TOOLS buttons to use such
functions as the disc navigator and
electronic programme guide (EPG) on
the connected recorder or player.
1 Switches the surround mode in order
Switches the input source in reverse
2
5
order
3 Switches the surround mode in reverse
6
order
4 Closes the control panel to return to the
INPUT+
HDMI Control menu
7
5 Displays the model number of the
connected device
6 Switches the input source in order
7 Void
1 Skips commercials
2 Fast reverse
5
Stops playback
3
4 Closes the control panel to return to the
6
HDMI Control menu
5 Displays the model number of the
connected device
6 Fast forward
Starts playback
7
7