Dns Relay - D-Link DSL-500 Command Reference Manual

9. diap
help - Gives help on available commands
enable - Enable DIAP Function
disable
passwd
status - Show status of DIAP settings
trace - Activates trace option(s)
untrace
version
10. dnsrelay
config - Show DNS relay configuration
help - List help on available commands
retry - Set max number of connection/tx retries
server - Manually specify DNS server IP address
status - Show DNS relay connection status
trace - Activate trace option(s)
untrace - Deactivate trace option(s)
version - Show DNS relay software version
state - enabled | disabled - Enable or Disable or Show state of
pppauto - enabled | disabled - Enable or Disable or Show state of
11. edd
event
interface
status
version
12. ethernet
event
DSL-500 Console Commands Index and Syntax
- Disable DIAP Function
- Set DIAP Passwd -- passwd <password>|none
- Deactivates trace option(s)
- Show software version
dnsrelay
pppauto
[level] - set event logging level
[id] command - process interface command for device id
- device status
- display driver information
[level] - set event logging level
5