Charge The Battery - Philips 855 User Manual

select Phonebook > Phonebook settings
>
select In SIM card.

Charge the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low.
We recommend that you do not remove the battery
when the phone is switched on: you may lose all your
personal settings (see information on battery safety,
page 93). If you do remove it, date and time settings
are memorized for around 2 minutes.
1. Once the battery and battery cover are clipped
on the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
BOTTOM hand socket at the base of the phone
on one end, then plug it into a main AC power
socket with easy access on the other end.
2. The battery symbol indicates the state of charge:
• During charging the 4 charge indicators change;
Each bar represents around 25% of charge and it
takes around 1.45 hours to fully recharge your
mobile phone.
Get started
> Phonebook
• When all 4 bars are steady the battery is fully
charged, you can disconnect the charger.
Depending on the network and condition of use,
talk time goes from 2 to 4 hrs and stand-by time
from 200 to 400 hrs.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn't damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
3. If you don't intend to use your phone for several
days, we recommend you disconnect the battery.
You can use the phone while it is on charge (note that
the vibra alert goes Off when plugging the charger). If
the battery is completely flat, the battery icon will only
reappear after 2 or 3 minutes of charging.
3