Samsung GX-SM530SL User Manual page 30

Settings  Channel
[Positioner settings]
If the [Positioner] option is set to [DiSEqC
motor] or [USALS] additional [Positioner
Settings] option will appear in the [Channel]
menu. You are able to use one of the following
options:
[User settings] or [Installer setting] for either
positioner.
[Installer settings]
These settings should be done while mounting
the antenna with a motor and shouldn't be
changed during normal use. It is to set limits on
the positioner motor if the satellite dish can't
move over whole driver angle (~180 degrees).
These limits are important, because if on the
way of the dish from one side you have the wall
and someone remove the limits from this side
dish can be destroyed.
In the [Installer settings], you will be able to:
• Set East limit
• Set West limit
• Go to initial position
• Disable limits
30