Kenmore 125.22614610 Use & Care Manual page 17

TO REMOVE DUST CUP
1. TXUQ Rç DQG XQSOXJ vacuum cleaner.
2. Lift dust cup handle located at the top
of the dust cup.
3. Pull the handle up and lift dust cup up
and out of the vacuum cleaner.
4. Remove any clogs that might be
located in the suction porW RU oOWHU SRrt
area.
EMPTYING DUST CUP
Dust Cup
Handle
Dust Cup
Filter Port
Suction
Port
- 17 -
TO EMPTY DUST CUP
1. Rotate dust
cup handle to
the vertical
position.
2. Hold dust cup
over a trash
container.
Dust Cup
Latch
The door will swing open and the debris
will fall into the trash container.
4. Shake the dust cup to release any
debris that might hang in the prHoOWHr.
5. After the dust cup
is empty of debris,
oUPO\ FORVH WKH GRRr.
Make sure you hear
a "click" sound to
indicate that the
door is fully latched.
TO REPLACE DUST CUP
2
1
2. Lower the dust
cup handle to
lock dust cup in
place.
A noticeable
"click" should be
heard.
Dust Cup
Handle
Dust Cup
3. Press the dust
cup latch slightly
outwards and
downward to
release the door.
1. Place dust cup
back into vacuum
cleaner by inserting
WKH ERWWRP oUVW DQG
tilting back with the
dust cup handle
raised.