Python 871XP Owner's Manual page 50

Arming
■
To arm, press
the parking lights will flash once.
Arming while driving
■
To arm the system while driving, press
vehicle is running. The system will chirp once and then once more to indi-
cate that the ignition is on.
Disarming
■
To disarm, press
flash twice.
High security disarm
■
For high security disarm, press
stop sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a 2-way remote
■
Turn on the ignition. Press the Valet
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
Silent Mode
■
Pressing
tion chirp(s) for that one operation only.
Panic Mode
■
Press
and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press
To remote start the vehicle
■
Press
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet
Number of Valet
© 2005 directed electronics—all rights reser ved
q q u u i i c c k k r r e e f f e e r r e e n n c c e e g g u u i i d d e e
. When the system arms, you will hear a short chirp, and
. You will hear two chirps, and the parking lights will
™
briefly before arming or disarming will eliminate the confirma-
for 2 seconds, and you will enter Panic Mode. The siren will sound
on the 2-way remote again.
and simultaneously. The parking lights will turn on (if
® button_________________________________
button pulses for disarming_______________
®
on your 2-way remote while the
on your 2-way remote and the siren will
button within 15 seconds. The system
®
47