Toyota Venza 2009 Owner's Manual page 185

Setting up the displays
Press the "SETUP" button while the vehicle is stopped.
STEP 1
The "Custom Settings" screen is displayed on the multi-information
display.
If left idle for approximately 10 seconds, the display will revert to the
previous screen.
STEP 2
STEP 3
2-2. Instrument cluster
Select "Display / Clock" by
pressing the "INFO" or "SETUP"
button, and press the "SELECT
RESET" button.
If you select "Exit" and press
"SELECT RESET", the display
will revert to the previous screen.
Select the desired item by press-
ing the "INFO" or "SETUP" but-
ton.
Press the "SELECT RESET" but-
ton to enter the setting mode.
The current setting is indicated by
yellow text.
2
187