Table of Contents
Advertisement
60
Voice Recognition
Call <contact name> At Home,
At Work,
On Mobile, or On
Other : Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
Call <phone number> : Initiate a
call to a standard phone number
seven or 10 digits in length, and
also three digit emergency numbers.
If the call is being initiated outside of
North America, say Call <phone
number>, then after the system
reads back the number, repeat the
Call command to initiate the call.
If the number is not correct, Delete
will delete the number and allow it to
be entered again. If the number is
not complete, speak the remaining
digits.
Pair Phone : Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
Switch Phone : Touch a different
phone for outgoing calls.
Voice Keypad : Begins a dialog
to enter special numbers like
international numbers. The numbers
can be entered in groups of digits
with each group of digits being
repeated back by the system. If the
group of digits is not correct, the
command Delete will remove the
last group of digits and allow them
to be re-entered. Once the entire
number has been entered, the
command Call will start dialing the
number.
Voice Mail : Initiate a call to voice
mail numbers.
Voice Pass-Thru
Voice pass-thru allows access to the
voice recognition commands on the
cell phone, for example, Siri
Voice Command. See the cell
phone manufacturer's user guide to
see if the cell phone supports this
feature. To activate the phone voice
recognition system, press and hold
g
on the steering wheel for a few
seconds.
Voice Recognition for OnStar
(If Equipped)
OnStar : Begin Onstar Voice
Recognition.
Voice Recognition for Weather
(If Equipped)
Weather : Begin a dialog to enter
a weather location.
®
or
Advertisement
Table of Contents
