Table of Contents
Advertisement
If you want to set a fixed IP address, set in the screen in step
above.
When the connection of the home audio system to your Wi-Fi network has completed, connect your PC to the previous destination or your wireless
router.
Note
This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from step
.
Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after setting the Wi-Fi security.
When you connect the home audio system to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby mode is turned
on automatically.
4-698-972-11(1) Copyright 2017 Sony Corporation
36
Advertisement
Table of Contents
