Samson 3730-3 Operating Instructions Manual page 120

Appendix
Code Parameter – Readings/
No. values [default setting]
Codes with marked with an asterisk (*) must be enabled with Code 3 prior to configuration.
t4 Target mode DI1 Trd
48* t5 Actual mode DI1 Trd
t6 Block error DI1 Trd
t7 Target mode DI2 Trd
t8 Actual mode DI2 TRD
t9 Block error DI1
Resource Block
S0 Resource target mode
S1 Resource actual mode Current operating mode
S2 Resource block error
DI1 Function Block
I0 Target Mode DI1
I1 Actual Mode DI1
I2 Field_Val_D.Value
I3 Field_Val_D.State
I4 OUT_D.Value
I5 OUT_D.State
I6 Block error
DI2 Function Block
L0 Target mode DI1
L1 Actual mode DI1
L2 Field_Val_D.Value
L3 Field_Val_D.State
L4 OUT_D.Value
L5 OUT_D.State
L6 Block error
120
Description
Target operating mode
Current operating mode
Current block error
Target operating mode
Current operating mode
Current block error
Target operating mode
Current block error
Target operating mode
Current operating mode
Discrete input variable and its status
Discrete output variable and its status
Current block error
Target operating mode
Current operating mode
Discrete input variable and its status
Discrete output variable and its status
Current block error
EB 8389 EN