Table of Contents
Advertisement
PATH ID DESCRIPTION
12
No routing.
13
No routing.
14
No routing.
15
No routing.
16
No routing.
17
Input signal is from REAR AUDIO IN and will be
routed to SCART1.
18
Input signal is from FRONT AUDIO IN and will be
routed to SCART1.
The paths that are available for audio routing and their
description (Nafta region)
PATH ID DESCRIPTION
00
Input signal is VIDEO(CVBS) from digital board
and will be re-routed back to the digital board.
01
Input signal is from FRONT AUDIO IN and will be
routed to the digital board.
02
Input signal is from REAR AUDIO IN 2 and will be
routed to the digital board.
03
Input signal is from FRONT AUDIO IN and will be
routed to the digital board.
04
No routing.
05
No routing.
06
No routing.
07
No routing.
08
Input signal is VIDEO(CVBS) and AUDIO from AN-
TENNA IN and will be routed to VIDEO(CVBS)
OUT and REAR CINCH OUT 2.
09
No routing.
10
Input signal is from REAR AUDIO CINCH IN 2 and
will be routed to REAR AUDIO CINCH OUT 2.
11
Input signal is from FRONT AUDIO CINCH IN and
will be routed to REAR AUDIO CINCH OUT 2.
12
No routing.
13
No routing.
14
No routing.
15
No routing.
16
Input signal is AUDIO from dvio board and will be
routed to AUDIO CINCH OUT 2.
17
No routing.
18
No routing.
19
No routing.
20
Input signal is from digital board and will be routed
to the REAR AUDIO OUT 1 and input signal is from
REAR AUDIO IN 2 and will be routed to the digital
board.
21
Input signal is from digital board and will be routed
to the REAR AUDIO OUT 1 and input signal is from
REAR AUDIO IN 1 and will be routed to the digital
board.
22
Input signal is from digital board and will be routed
to the REAR AUDIO OUT 2 and input signal is from
REAR AUDIO IN 1 and will be routed to the digital
board.
EXAMPLE
DD:> 713 00
71300: Audio routing on the Analogue Board OK.
Test OK @
Diagnostic Software and Faultfinding Trees
DVDR980-985 /0X1
5.
EN 85
Advertisement
Table of Contents
