Picture Setting - JVC LT-42C550 Instruction Manual

Customising TV Settings
5

Picture Setting

Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
PICTURE menu and then press the OK button.
2. Press the
buttons to select the following picture options and then
press the OK button.
3. Press the buttons to select the options. Press the OK button and then press the
setting.
Picture Mode
30
Select among picture mode: Standard / Movie / User / Dynamic.
Alternative
You may press the P.MODE button to select the picture mode directly.
Contrast Adjusts the difference between light and dark levels
in the picture (for User mode).
Brightness Increases or decreases the amount of white in the
picture (for User mode).
Colour Controls the colour intensity (for User mode).
Sharpness
Adjusts the level of crispness in the edges between
light and dark areas of the picture (for User mode).
Tint (For NTSC
Adjusts the balance between red and green levels
format) (Tint is only available for NTSC signal reception).
Backlight
Adjusts the backlight setting of your TV. This controls the brightness and display
performance of the screen.
Increasing the backlight setting will increase the brightness and display
performance of the screen. The higher the setting is, the higher the power
consumption. You can select from 1-10 to strike a balance between the
picture brightness / display performance / power consumption. Reducing
the backlight setting will help you reduce power consumption and thus save
money by reducing electricity bills.
buttons to select the
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Picture Mode Standard
Colour Temperature
Aspect Ratio
Noise Reduction
PICTURE
Screen
buttons to adjust each option's
Picture Mode Standard
Contrast 50
Brightness 50
Colour 50
Sharpness 50
Tint 50
Backlight 7
BACK EXIT MENU