Starting The Engine - Poulan Pro PR121ES Owner's Manual

Table of Contents

Advertisement

Starting the Engine

1. Push key in (Figure 9).
1. Key
2. Move choke lever to left position (Figure 10).
Figure 10
1. Choke lever
1
Figure 9
1
3. Firmly push in the primer 2 times with your thumb,
holding the primer in a for a second before releasing
it each time (Figure 11).
1. Primer
NOTE: Remove your glove when you push in the primer
so that air cannot escape from the primer hole.
IMPORTANT: It may not be necessary to use the primer
or the choke if the engine has been running and is hot.
Excessive priming may fl ood the engine and prevent it
from starting.
4. Pull the recoil starter (Figure 12) or if your snow thrower
is equipped with an electric starter, connect an exten-
sion cord to the snow thrower and plug the other end
into a three-hole grounded 110 volt A.C. receptacle
and push the electric-start button (Figure 13).
1
1. Recoil start handle
8
1
Figure 11
Figure 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents