Using The Camera - Kyocera KX21 User Manual

82-N8757-1EN.book Page 42 Thursday, December 1, 2005 8:42 AM
11 U C
SING THE AMERA
Tips before operating your
camera
• You cannot activate the camera while on a call.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings.
See "Setting up the camera" on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Camera settings and options can only be
accessed when the camera is active.
Accessing camera mode
The camera can be used with the flip open
or closed.
Flip closed
Press until you hear one beep to activate
camera mode.
Flip open
Press until you hear one beep to activate
camera mode.
42
Camera settings
1.
Press and hold to activate picture mode.
2.
Press the right softkey to select
3. Settings
Press to select .
4.
Highlight an option and press
Flash
– options are On, Off, or Automatic.
Resolution
– options are 640 x 480, 320 x 240
(best for sending to email), and 160 x 120.
Low Light Mode
– brightens the picture for
low light environments.
Self Timer
– options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
Multishot
when mode is activated.
Multishot
– allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken.
Shutter Sound
– sets the sound used when
the camera takes a picture.
White Balance
– allows the camera to adjust
for different lighting. Options are
Automatic, Fluorescent, Incandescent,
or Daylight.

Using the Camera

.
Options
: