Voice Recognition Mode; Name; Dial - Pantech TX-95C User Manual

VOICE RECOGNITION MODE

Voice Recognition (VR) enables you to place calls using your voice
and to record voice memos.
1
Press and hold until your phone turns to
Voice Recognition mode.
2
The display to the right will appear when the
phone turns on Voice Recognition mode.
Depending on the prompt mode, expert or beginner, you will hear
either of the following prompts. The second prompt automatically
plays when nothing is said. (Please see page 92 for more
information on prompt modes.)
Beginner Mode
- 1 st : "Main Menu"
- 2 nd : "Speak a name to call, or say dial.
Expert Mode
A sequence of low tone and high tone.
- 1 st :
- 2 nd : "Main Menu"
Once you say your selection, you will be taken through each of the
procedures (name, dial, redial, voice memo, phone book, cancel).
C
H

NAME

5
1
Press and hold until your phone turns to
Voice Recognition mode.
2
If you say a name or tag that is already in the
phone book, the number and name will appear on
the display, and you will hear "Calling (name)".
88
VOICE RECOGNITION MODE

DIAL

1
Press and hold until your phone turns to
Voice Recognition mode.
2 Say "Dial" in the Voice Recognition mode and
you will see the display on the right.
Depending on the prompt mode, expert or beginner, you will hear
either of the following prompts. The second prompt automatically
plays when nothing is said. (Please see page 92 for more
information on prompt modes.)
Beginner Mode
- 1 st prompt: "Digit menu"
- 2 nd prompt: "Say digits or verify, cancel, clear or call."
Expert Mode
- 1 st prompt: A sequence of high and low tones sound
- 2 nd prompt: "Digit menu"
3
Press or say the digits of the phone number.
4
Say "Call" after entering the entire number.
89
C
H
5