Advertisement
Lights and Sounds Unit Setup (if equipped)
For initial operation
remove Pull Tab
Battery Replacement:
Batteries: DC 1.5V, AAA (included). The unit requires 3 batteries.
1. Loosen the battery compartment cover Screw (A) to remove the Cover (B).
2. Insert batteries in the orientation shown inside the compartment.
3. Re-install the compartment cover and tighten the screw.
WARNINGS:
• Battery replacement is to be conducted by an adult.
• Dispose of batteries properly. Do not dispose of batteries in fire, batteries may
explode or leak. Check local regulations for proper battery disposal.
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and used batteries are not to be mixed.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Keep the unit from getting wet.
• The battery supply terminals are not to be short-circuited.
• Rechargeable batteries are to be removed from the unit before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
This unit produces flashing lights and light patterns. Although rare, it is possible for
children to be susceptible to photosensitive seizures when exposed to certain flashing
lights or light patterns. It is important that parents monitor their children while playing
with this unit. To reduce exposure to such potential, play in a well-lit area and keep an
appropriate distance from the flashing lights.
Parents must assess whether their child's capabilities, development and coordination
8
is appropriate for use of this unit.
For initial operation remove Pull Tab
AAA/1.5V
AAA/1.5V
AAA/1.5V
B
A
Advertisement
