Table of Contents
Advertisement
50
Contacts
Voice-activated dialling
You can dial numbers from the contacts
by speaking the name. SIM contacts,
distribution lists and groups cannot
have a voice tag.
You have to record a voice tag for every
number so your phone "recognises" you.
To record voice tags you speak the name
loudly and clearly into the phone and
store it.
You can store 99 voice tags. You can
assign one voice tag to each number of a
contact.
Recording a voice tag
Record the voice tag in a quiet environ-
ment. You should speak into the phone
from a distance of about 25 cm. The
voice tag may be 3 sec. long.
If you use voice-activated dialling mainly
with a handsfree set it is useful to record
the voice tag with the handsfree set.
Open the Contacts tab.
F
Select a contact.
I
Open menu and select Edit.
§Options§
Select number input field.
I
§Options§
Open menu and select
Record voice
§Start§
Start recording.
tag.
An appropriate prompt appears
on the display. Speak the name
(max. 3 seconds). Repeat the name after
playback.
The two recordings have to be
• sufficiently similar to each other and
• sufficiently different from any other
voice tag.
Confirm completed
C
recording.
Recording not successful
If the recording is not successful, you are
prompted to repeat recording.
§Restart§
Press to start recording
again.
If there is not enough memory for a
new voice tag, a notification is displayed.
Confirm notification, delete existing tags
and try again.
Voice-activated dialling
Press and hold.
G
Speak the name after the signal tone. If
the name matches the saved voice tag
the number is dialled.
• If the name does not match a saved
voice tag, you are prompted to repeat
the name. If three attemps fail, voice
dialling is terminated automatically.
• You can assign the voice dialling func-
tion to any shortcut key (page 111).
• If a headset is plugged into the phone:
Press the ptt key on the headset to
activate voice dialling.
Advertisement
Table of Contents
