Operating the Smart Park
Parking Brake
The parking brake is activated electronically.
Engage the parking brake by 1 of the following actions:
•
Pressing the Smart Park
(Figure
6).
•
The parking brake engages automatically when the
operator leaves the seat and the traction control pedal is
in the
position.
NEUTRAL
•
The parking brake automatically engages 5 to 6 seconds
after the ignition switch is turned to the
it is not already engaged).
Disengage the parking brake by 1 of the following actions:
•
Tap the traction-control pedal forward or reverse.
•
Pressing the brake switch to the
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the mower
blades and any powered attachments.
Engaging the Blade-Control Switch
(PTO)
Figure 13
Note: Always engage the blades with the throttle in the F
position
(Figure
14).
™
™
switch to the
position
ON
position (if
OFF
position
(Figure
OFF
G008945
Disengaging the Blade-Control Switch
(PTO)
6).
1
Operating the Throttle
You can move the throttle control between the F
g008945
S
positions
(Figure
LOW
Always use the F
AST
deck with the blade-control switch (PTO).
AST
17
Figure 14
g027538
Figure 15
16).
position when turning on the mower
Figure 16
g187516
g027538
and
AST
g187517