Advertisement
Quick Links
Advertisement
Related Manuals for Pyle PDC21
Summary of Contents for Pyle PDC21
- Page 1 OWNER’S MANUAL P D C 2 1 www.pyleaudio.com...
-
Page 2: Front And Rear Panel Layout
PARA OUT – It’s parallel output 1/4” jack for passing the input signal through to a stage amplifier or monitor system. ATT Switch – input attenuation, switchable(0dB,-20dB,-40dB) BALANCED OUTPUT – Male XLR connector. GROUND – When engaged, the ground from the PDC21 chassis detaches from the XLR jack. - Page 3 The PDC21 enables you to tap off the signal from a guitar or bass guitar and pass the signal from the PARA OUTPUT to the on stage amplifier without affecting the original sound.
- Page 4 The PDC21 provides the capability of tapping off the signals from amplifiers, such as the output or guitar amp or power amplifier. You can even use PDC21 to connect to the speaker output of a consumer stereo system or boom box, for example, if you want to sample some old records or cassette tapes.
-
Page 5: Converting The Output Of Unbalanced Devices
NOTE: This example may appear to be the same as the previous, however in this example, the PDC21 is tapping the sound of the instruments and amp, as opposed to just the instrument itself. Converting the output of Unbalanced Devices... -
Page 6: Balanced Output
The PDC21 can be quite useful on stage or in the studio for connecting unbalanced devices, particularly key boards. The output levels of many keyboards are low. So their signals can benefit greatly by connecting their unbalanced outputs to the PDC21 by doing so the signal can be sent cleanly for long distances while benefiting from the low noise and common mode rejection provided by PDC21’s balanced low-level output.