Table of Contents
Advertisement
FUNCTION
Exit
Troubleshooting guide
The following checklist will help you solve problems you may encounter with your unit.
Before going through the checklist below, check the connection and operating.
if you can not solve the problem with follows guide, please contact your nearest dealer.
Problem
No picture, no sound
Good picture, but no sound
Dolled lines or stripes
No picture, or no sound when you
connect the optional equipment
No response when pressing the buttons on
the wireless remote
When the
button to exit the setup.
Remote
Cause/solution
The power cord or battery has been disconnected.
The fuse has blown.
Press power on.
Press the volume increase button on the wireless
remote, or on the monitor.
Press the mute button from the wireless remote.
(TIP: refer to page 4 for the "control & layout")
This maybe caused by local interference such as car
engine or motorcycle.
The cord has been disconnected. Connect the cord
securely.
Press power on.
The wireless remote batteries may be exhausted.
18
symbol at "Exit" Press the MENU (1)
2
1
3
Monitor
Advertisement
Table of Contents
