Setting Up The Dome Lamps - Pyle view PLVW1350IR User Manual

Setting Up The Dome Lamps

There are three settings for the interior
light: OFF, DOOR and ON (see diagram
below).
OFF: The lights are switched off.
DOOR: With this setting, the lights only
come on when the vehicle's doors are
opened.
ON: The lights are switched on.
ON
OFF
Notes:
* There is no electrical cable connected
to position "B", since "B" is connected
to the ground via two screws.
* The power supply must be 12 volts.
W=White=Connection to the sensor
B=Black=Ground
R=Red=Electrical connection
Left
DOOR
The right sw control right lamp
The left sw control left lamp
OFF
Door
ON
W
Door
B
ON
LAMP
SW1
OFF
LAMP
Sw2
5
Right
Battery
R