Download Print this page

Specifications; Electromagnetic Compatibility - Philips LTC 5104/60 Manual

Ltc 5104 series; ltc 5108 series 4- and 8-position premium sequential switchers
Hide thumbs Also See for LTC 5104/60:

Advertisement

SPECIFICATIONS

Electrical
Model
Rated
No.
Voltage
LTC 5104/60
120 VAC, 50/60 Hz
LTC 5104/50
230 VAC, 50/60 Hz
LTC 5108/60
120 VAC, 50/60 Hz
LTC 5108/50
230 VAC, 50/60 Hz
Models shown are for English on-screen menus model.
Switching Time: Less than 1 microsecond.
Dwell Time: Each camera individually or globally set from
1 to 64 seconds.
Alarm Dwell Time: 1 s to 64 s.
Alarm Capture Time: 1 s to 63 s.
Video Gain: Unity.
Bandwidth (-3 dB point): 15 MHz minimum.
Differential Gain: 1% typical.
Differential Phase: 1° typical.
Video Crosstalk (Input to input isolation): -50 dB
typical at 3.58 MHz.
Video Feedthrough (Input to output isolation): -65
dB typical at 3.58 MHz.
Memory Back-Up: Nonvolatile memory back-up.
Controls:
Front Panel: Momentary Push Button Controls: DWELL,
SKIP/clr, ALARM, RUN/next, each video input.
Internal: Video input has automatic termination.
Indicators: ALARM, RUN/next, each video input.
Titling: 16-character camera titling.
Connectors:
Video Inputs:
0.5 Vp-p to 2 Vp-p.
LTC 5104 Series: 4 inputs; 8 BNC connectors.
LTC 5108 Series: 8 inputs; 16 BNC connectors.
Video Outputs:
LTC 5104 Series: 1; BNC (75 ohm).
LTC 5108 Series: 2; BNC (75 ohm).
Alarm Inputs:
1
LTC 5104 Series: 4.
1
LTC 5108 Series: 8.
Alarm Outputs:
Isolated contact closures 1 A, 40 V AC/DC.
1
Accessory Output:
1. One 15-pin alarm/accessory connector.
© 1999 Philips Electronics N.V.
9498 961 05612 99-05
© 1999 Philips Communication & Security Systems Inc.
Printed in U.S.A.
All Rights Reserved. Philips ® is a registered trademark of
Philips Electronics N.V.
Data subject to change without notice
Voltage
Power at
Range
Rated Voltage
105 to 130
4 W
198 to 264
4 W
105 to 130
4 W
198 to 264
4 W
Mechanical
Cable (Included): One cable with 15-pin connector.
Finish: Charcoal.
Dimensions: 223 W x 280 D x 40 H mm (8.77 x 11.0 x
1.59 in).
Weight: 2 kg (4.5 lb).
Environmental
Temperature:
Operating: -18 ºC to +50 ºC (0 ºF to +122 ºF).
Storage: -40 ºC to +60 ºC (-40 ºF to +140 ºF).
Humidity: 10% to 80% relative, noncondensing.
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz.
Shock: 50 g, 11 ms, 1/2 sine.

Electromagnetic Compatibility

EMC Requirements: CE Immunity, CE Emission Class B,
FCC Class B, ICES-003.
Safety: CE, UL, cUL.
Options
LTC 9101/00 Rack Kit: For mounting one or two units in
an EIA 9-inch rack.
Height: 1 standard rack unit.
Width: 1 standard rack unit.

Advertisement

loading

This manual is also suitable for:

Ltc 5108/60Ltc 5104/50Ltc 5108/50