Cisco USC 3330 Quick Start Manual page 9

Table 1 USC 3330 Status LED Indications (continued)
LED Indication
Red blink 3 times
in 4 seconds
Red blink 4 times
in 4 seconds
Red
Safety Instructions
Translated versions of the following safety warnings are provided in
Cisco USC 3330 Regulatory Compliance and Safety Information, located on
Cisco.com.
Cisco USC 3330 Quick Start Guide
Small Cell State / Action
Interference with other systems—Try placing your
small cell in a different place. If this problem persists,
contact customer support.
Overheating—Verify that the small cell is located
where there is proper air flow.
Initial boot—Wait up to 20 minutes; if still red, perform
a reset.
Cannot create secure connection—Contact customer
support.
Internal fault—Contact customer support.
RF issue, cannot select an RF profile—Verify whether
another small cell is located in close proximity and if
so, relocate unit.
Provisioning failure—Contact customer support.
5