Advertisement

E 15
FORM NO. 769-10224A
MTD Products Aktiengesellschaft • Saarbrücken • Germany

Advertisement

Table of Contents
loading

Summary of Contents for MTD Cub Cadet

  • Page 1 E 15 FORM NO. 769-10224A MTD Products Aktiengesellschaft • Saarbrücken • Germany...
  • Page 6 English ..... . . (Original operating instructions) Français ..... . (Notice d’instructions d’origine) Deutsch .
  • Page 7: Table Of Contents

    English Operating Manual Contents For your safety Before using the mower For your safety ....4 If you are tired or ill, do not use Using the mower correctly Assembly .
  • Page 8: Safety Devices

    Operating Manual English Safety devices Only refuel the mower out in the Warning! open. Before switching on The safety devices are provided for the unit, read the Avoid naked flames, spark your protection and must be kept in operating instructions! formation and do not smoke.
  • Page 9: Assembly

    English Operating Manual Symbols in the operating Store batteries out of the reach of Never ride straight up or down an incline, children. Never tilt the battery, as instructions but always across it. battery acid may run out. The following symbols are used in Bring the remaining, unused this guide: battery acid to your dealer or to a...
  • Page 10: Controls And Indicators

    Operating Manual English Fitting the steering column Attaching trailer coupling Information on forward/reverse (optional) pedal Fig. 2b To stop or change direction of tra- Fig. 2f Lower part (A) of the steering vel, release the appropriate pedal. Remove trailer coupling (1) from column ...
  • Page 11: Ignition Lock

    English Operating Manual Press the button (1) on the cutting Operating hour counter Air filter maintenance:  height adjustment lever and lower Every 25 operating hours (type 1, type 2): the lever to the required position. (air filter maintenance interval) the When the ignition is switched on, Release the button (1) so that letters...
  • Page 12: Operating Procedure

    Operating Manual English Adjustable seat (16, optional) Be particularly careful when The indicator light (2) comes on and indicates to the user that the mowing in reverse gear (units with Fig. 10 unit can now mow in reverse and OCR switch). There must be Press lever to the side and adjust forward gear.
  • Page 13: Starting The Engine

    English Operating Manual Danger of asphyxiation due to Before operating the unit, Setting the cutter wheels carbon monoxide poisoning always Fig. 11 Run the internal combustion engine The cutter wheels should never be Check: outdoors only. lower than 6–12 mm above the all guards, ...
  • Page 14: Tips On Lawn Care

    Operating Manual English General information Release both gears: Note  Pull out both gear When adjusting the cutting height Be particularly careful when release levers and and driving speed, ensure that the reversing. Never change the press to the right. machine is not overloaded.
  • Page 15: Transporting The Mower

    English Operating Manual Transporting the mower Cleaning/servicing Cutters with cleaning nozzle (optional) Drive the machine only short Fig. 19 Danger distances otherwise transport it by Place the appliance on an even Injury hazard if engine is started vehicle. Use a transportation surface free of debris, stones, etc., inadvertently vehicle for greater distances.
  • Page 16: Removing/Installing And Adjusting Cutter Deck

    Operating Manual English Connect the black jump lead first Lubricate the steering with Once per season   to the negative terminal (–) of the grease Type 251H EP via the Lubricate all rotating and bearing  donor battery. Connect the other grease nipples on the steering points (operating lever, height clip to the frame of the engine...
  • Page 17: Off-Season Storage

    English Operating Manual Ensure that the cutting height Setting the cutter level Lowering: adjustment lever is engaged Turn both nuts (2) equally anti-  When mowing does not appear to clockwise until the level is correctly on the fixing pin. be parallel to the lawn the cutters correct.
  • Page 18: Information About The Engine

    Operating Manual English Information about the Troubleshooting – wait until all moving parts have come to rest and the engine has engine fully cooled, Danger – pull off the cap of the spark plug The engine manufacturer is liable Injury hazard if engine is started so that the engine cannot for all engine-related problems with inadvertently...

Table of Contents