The meters and display illuminate when
■
The engine switch is in IGNITION ON mode.
Instrument panel brightness adjustment
■
The instrument panel brightness levels when the tail lights are on and off can be adjusted
individually. However, when the surroundings are bright (daytime, etc.), turning on the tail
lights will not change the instrument panel brightness. At this time, any adjustments made
to the instrument panel brightness levels will be applied to both settings at once.
Outside temperature display
■
In the following situations, the correct outside temperature may not be displayed, or the
●
display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
When "_ _"or "E" is displayed, the system may be malfunctioning.
●
Take your vehicle to your Lexus dealer.
Pop-up display
■
In some situations, such as when a switch operation is performed, a pop-up display will
●
be temporarily displayed on the multi-information display or the odometer/trip meter
screen (F SPORT models).
Some pop-up displays can be set on/off. (P. 111)
●
Customization
■
The meter display can be customized on the multi-information display. (P. 111)
NOTICE
To prevent damage to the engine and its components
■
Do not let the indicator needle of the tachometer enter the red zone, which indicates
●
the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is in the red
●
zone (H). In this case, immediately stop the vehicle in a safe place, and check the
engine after it has cooled completely. (P. 526)
RC350_RC300 AWD_RC300_RC F_U(OM24748U)
2. Instrument cluster
95
2