Dosing Aid / Daily Use - Whirlpool FSCR 10431 Health & Safety, Use & Care And Installation Manual

DOSING AID / DAILY USE

1 .
After you have loaded the laundry,
closed the door and selected programme
and options, press the "Dosing Aid" button . The
Dosing Aid button lights up .
2 .
Start the programme by pressing "Start/
Pause" . – The drum rotates to detect the
laundry load; the display indicates the load sensing
phase . On the control panel, an animation occurs .
Afterwards the recommended detergent amount
for the main wash compartment in ml appears on
the display .
If you have selected Prewash option, the display
alternately shows the amount for prewash (I) and
main wash (II) compartment .
32
3 .
Pull out the detergent dispenser and
pour the recommended detergent quantity
into the main wash (II) and, if Prewash is
selected, also into the prewash (I)
compartment of the detergent dispenser .
Instead of adding the detergent to the detergent
dispenser, it can also be added directly into the
drum, in a detergent ball .
If Prewash is selected: prewash detergent can be
added into the drum, main wash detergent must
be added to the main wash compartment of the
detergent dispenser . Use powder detergent for the
main wash in this case, to ensure that it stays in the
detergent dispenser until start of the main wash
phase .
4 .
Close the detergent dispenser (or the
door) and press "Start/Pause" to continue the
programme .