Advertisement
Audio Set Up Lab.
Below you find the basic initial audio setup with all possible features.
PC
You can see that some of the mono inputs and outputs are combined into stereo inputs and outputs.
The initial setup in the research-labs will make use of the audio connections of the lab-computer and the
Behringer. The computer settings of the audio card make use of the Line-Output for presenting stimuli
and the Line-Input is set for audio responses and recordings.
In exceptional circumstances additional setting or features of the Behringer are needed. You can use the
Xair-mixer for this. Contact the TSG if this is the case.
Behringer
Behringer-1-setup TSG
PC Line OUT-R
Behringer Input-4
PC Line OUT-L
Behringer Input-3
PC Line IN-R
Behringer AUX-2
PC Line IN-L
Behringer AUX-1
Extra UTP Card in PC connection
IP: 192.168.1.101
USB 2.0 to USB PC connection
Phones Exp-R
Behringer Control-R
Phones Exp-L
Behringer Control-L
Radboud University Nijmegen. FSW/TSG june 2017
Behringer Input-1
MIC IN Subject-1
Behringer Input-2
MIC IN Subject-2
Behringer Main-R
Phones Sub-1-R
Behringer Main-L
Phones Sub-1-L
Behringer AUX-4
Phones Sub-2-R
Behringer AUX-3
Phones Sub-2-L
Behringer AUX-6
Speakers Cabin-R
Behringer AUX-5
Speakers Cabin-L
Behringer set as DHCP server
IP: 192.168.1.1
5
Advertisement
