Important instructions for environment 2.1 Compliance with WEEE Directive 2.2 Package information Intended use...
Page 6
Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Annual Energy Consumption (kWh) 0.93 Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.64...
4.3.4 Programme and consumption table Auxiliary functions Program Selectable temperature range °C 2.25 1600 • • • Cold - 90 Cottons 1.70 1600 • • • Cold - 90 1.05 1600 • • • Cold - 90 60** 7 0.93 1600 Cold - 60 Cottons Eco...
Page 16
Indicative values for Synthetics programmes (EN) 1,10 0,80 4.3.5 Main programmes 4.3.6 Additional programmes...
Page 18
4.3.7 Special programmes 4.3.8 Temperature selection 4.3.9 Spin speed selection Rinse hold...
Page 19
This function helps to remove pet hair that remain on your garments more effectively. steps are added to the normal programme. Thus, washing removed more effectively. Never wash your pets in the washing machine. To activate the Child Lock:...
Page 20
To deactivate the Child Lock: 4.3.11 Delayed Start Changing the delayed start period Canceling the Delayed Start function 4.3.12 Starting the programme...
Page 21
4.3.13 Progress of programme 4.3.14 Loading door lock 4.3.15 Changing the selections after programme has started Switching the machine to pause mode Adding or taking out laundry...
Page 22
4.3.16 Cancelling the programme 4.3.17 End of programme 4.3.18 Your machine features "Standby Mode".
4.4 Maintenance and cleaning 4.4.1 Cleaning the detergent drawer 4.4.2 Cleaning the loading door and the drum 4.4.3 Cleaning the body and control panel 4.4.4 Cleaning the water intake filters...
Page 24
4.4.5 Draining remaining water and cleaning the pump filter CAUTION: CAUTION: CAUTION: In order to clean the dirty filter and discharge the water: CAUTION: The product does not have an emergency water drain hose, in order to drain the water:...
Troubleshooting Problem Reason Programme does not start Start / Pause / Cancel button was not pressed. after c Programme cannot be started or selected. pressure, etc.). mode after the programme water. the programme started. low voltage. come to an end.
Page 26
Problem Reason Solution Washing takes longer time than Water pressure is low. specified in the manual.(*) Voltage might be low. Input temperature of water might be low. Number of rinses and/or amount of rinse water might have increased. Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage.
Page 27
Problem Reason Solution Washing performance is poor: Regular drum cleaning is not applied. Oily stains appeared on the laundry. (**) Washing performance is poor: Odours and bacteria layers are formed on the Clothes smell unpleasantly. (**) drum as a result of continuous washing at lower temperatures and/or in short programmes.
Page 28
Problem Reason Solution Too much foam forms in the Improper detergents for the washing machine are machine. (**) being used. Excessive amount of detergent is used. Detergent was stored under improper conditions. Some meshed laundry such as tulle may foam too much because of their texture.