Connecting Dvr To The Router; Configuring Dvr Router Setup; What Is Port? - Samsung SME-2220N Quick User Manual

7.
If the connection does not establish, check all cable connections
and go to step 2.1 and select <Repair>.
On the "Local Area Connection Status" window, click
<Support> tab and check <Default Gateway> if matches to the
one found in the [cmd.exe], and check the connection again.
Step 3. Connecting DVR to the router
Step 3.1 Configuring DVR router setup
1.
Press [MENU] button and select <SYSTEM SETUP> when setup
menu appears.
2.
When the login window appears, enter the Password (Default: 4321)
and press the [ENTER] button.
3.
In system setup menu, select <NETWORK> icon and press the
[ENTER] button.
4.
Use direction buttons (▲▼◄►) to move to a desired item.
5.
Enter the <IP ADDRESS>.
The IP address consists of 4 fields, and the first 3 fields should be
same to those of <Default Gateway> address of your computer
which can be found in Step 2, and the last field should be unoccupied number (between 2 and 254).

ex) IP ADDRESS : 192.168.1.200
6.
Enter the <GATEWAY> and <SUBNET MASK> as same to those of your computer found in Step 2.
7.
Set the <RTSP SERVICE PORT> and <WEB SERVER PORT>.
Set the RTSP Service Port and Web Server Port by referring to the below.

What is port?

As usual, the <WEB SERVER PORT> uses port 80.
If the port is not setted, it is atomatically regarded to 80 in http protocol.
For example, http://www.yahoo.com and http://www.yahoo.com:80 are regarded the same.
Hence, if the <WEB SERVER PORT> has been changed other than 80, you need to specify the address as:
http://<IP ADDRESS>:<WEB SERVER PORT>

ex) http://192.168.1.200:8080 to connect to the DVR using internet browser.
(Only when the port is set to 80, you can omit the port in the address.)
It is recommended to set <WEB SERVER PORT> to port number between 1024 and 65535.
If the port is not set to 80, accessing can be restricted depending on your service provider's security policy or
firewall configuration.
DVR uses <WEB SERVER PORT> and <RTSP SERVICE PORT> for web connections.
<WEB SERVER PORT> is used for accessing DVR by using an internet browser.
<RTSP SERVICE PORT> is used for receiving video from DVR to internet browser.
J

When configuring multiple DVR, <WEB SERVER PORT> and <RTSP SERVICE PORT> settings should be configured
differently for each device.

ex) DVR #1 RTSP SERVICE PORT : 554, WEB SERVER PORT : 8080
DVR #2 RTSP SERVICE PORT : 50000, WEB SERVER PORT : 2000
IP SETUP
DDNS
E-MAIL
English-4
NETWORK
DHCP
IP ADDRESS 192.168.1.200
GATEWAY 192.168.1.1
SUBNET MASK 255.255.255.0
1st DNS SERVER 168.126.63.1
2nd DNS SERVER 168.126.63.2
RTSP SERVICE PORT 554 AUTO PORT DELETE PORT PORT TEST
WEB SERVER PORT 8080
AUTO PORT DELETE PORT
DDNS HOST NAME http://ff00000 .websamsung.net:8080
MAX TX SPEED 8192 KBYTE
HELP CANCEL APPLY CLOSE