Coin Type - LG TCW2013LS2 Owner's Manual

24
PROGRAMMING MODE

Coin type

Algorithm flow chart shows how to control programming mode.
Before program set, check the structure of programming mode.
1. Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instructions).
2. Press Hot button to move to the upper level.
3. Press Warm (+) or Cold (-) button if you want to be at the same level.
4. Press Start button to enter the details of Set up or Diagnostic Tests.
is to set price value, time value, vend type, etc.
consists of line test, reset, free cycle, and kill cycle.
is to collect the usage data.
Structure of Programming mode
NOTE
• Do not use
• It is used only in inspecting the machine.
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is USA)
, .
mode (Refer How to enter the
)