Constitution Of The Radio Frequency Keyless Entry System With Door Lock; Controller For Vehicle - Omron 50J6 Manual

Rf keyless entry system
Table of Contents

Advertisement

1. Constitution of the Radio Frequency Keyless Entry
System with Door Lock Controller for vehicle
The radio frequency keyless entry is a system that it controlls locking and unlocking the door by
wireless remote controller. This system consists of two components. The TRANSMITTER is a device that
transmits the signal when the button is pressed. The transmission signal consists of several synchronous
codes, unique identification code, security code and function code. The RECEIVER is fixed inside the
vehicle. It works intermittently to prevent the battery exhaustion. When the receiver detects the
synchronous code, it runs continuously to receive the signals completely. After receiveing the signal, the
receiver decides which operation will be performed. The user can select the following operations by
pressing the button of the remote transmitter.
OPERATION
LOCK
UNLOCK
PANIC
This receiver also controls wired operation. When the key is in the driver's side key cylinder, all doors will
Unlock if the key is turned to UNLOCK and hold more than one second. In case of the operation time is shorter,
the only diver's side door is mechanically unlocked. It is also available to control the door lock status by using
the remote door control switch(both driver's and passenger's side).
Lock the door
Unlock the door (Open the window)
Beep the horn and flush the small light. (it continues 30 seconds)
Transmitter
f = 313.85MHz
ACTION
- 1 -

Advertisement

Table of Contents
loading

Table of Contents