Operation Instructions; Electronic Control Operating Instructions - Carrier 51QW007716G User Manual

Operation instructions

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote controller as shown below
and all its functions, then follow the instructions for the functions you desire. The unit can be controlled by the
unit control alone or with the remote controller.
℃
TEMP
POWER
℃
TEMP
POWER
NOTE:
The cooling only models have no
Heat indicator light.
Heat
Cool
MODE Fan
Dry
Auto
SWING
On/Off
FAN
High
Low
Sleep Mode
Heat
Cool
Fan
MODE
Dry
Auto
SWING
On/Off
High
Med
FAN
Low
Sleep Mode
POWER keypad:
Press the POWER keypad to turn the unit on/off.
MODE keypad:
Press the "MODE" keypad to select the desired operat-
ing mode. For the Cooling & Heating models, the mode
selection will alternate between Auto, Heat, Cool,
Fan and Dry. For the Cooling only models, select the
operating mode from Cool, Fan, Dry and Auto.
The green indicator light beside the "MODE" option will
illuminate, identifying the mode selected.
When using the Dry and Auto mode, fan speed can
not be adjusted.
TEMPERATURE SETTINGS UP:
Press the keypad to increase the set (operating)
temperature of the unit. Each time the keypad is
pressed, the temperature increases as follows:
O
1 C (Celsius Scale) Maximum Setting 31 C.
TEMPERATURE SETTINGS DOWN:
Press the keypad to decrease the set (operating)
temperature of the unit. Each time the keypad is
pressed, the temperature decreases as follows:
O
1 C (Celsius Scale) Minimum Setting 16 C
FAN keypad:
Press this keypad to select the desired fan speed setting.
Each depression of the keypad will alternate through
Low, Med(if applicable), High fan speed options. The
green indicator light beside the Fan speed option will
illuminate, identifying the fan speed selected.
6
O
O