Advertisement
Quick Links
XL-50BT
UNIVERSAL BLUETOOTH RECEIVER
with VOLUME CONTROL
Application Guide
Please read through this manual to familiarize yourself with your new Bluetooth Receiver.
Should your PowerBass Xtreme Bluetooth Receiver ever require service, you will need to
have the original dated receipt.
Advertisement
Summary of Contents for PowerBass XL-50BT
- Page 1 XL-50BT UNIVERSAL BLUETOOTH RECEIVER with VOLUME CONTROL Application Guide Please read through this manual to familiarize yourself with your new Bluetooth Receiver. Should your PowerBass Xtreme Bluetooth Receiver ever require service, you will need to have the original dated receipt.
-
Page 2: Specifications And Dimensions
SPECIFICATIONS AND DIMENSIONS • Universal Bluetooth Receiver with Volume Control • Mounting: Under Dash or Flush Mount • Connections: 12V Power, Ground and Remote Out • Outputs: RCA • Compatible with Android, iPhone and most other Bluetooth enabled devices • Range: 30 Feet •... -
Page 3: Installation Instructions
3) Connect the orange wire to the remote turn-on lead of your amp. This will turn your amp on and off from the XL-50BT. 4) Connect the red and white RCA output jacks to your amps input jacks. Use the supplied RCA to 3.5mm signal adapter, if your amp uses a 3.5mm audio input. - Page 4 CONTROLLER LAYOUT AND OPERATION Fig.3 1) POWER BUTTON Press the button down to power the controller on/off. 2) VOLUME KNOB Turn the volume knob towards the right to raise the volume. Turn the volume knob towards the left to lower the volume. There will be and audible beep to indicate maximum and minimum volume.
- Page 5 XL-50BT WIRING DIAGRAM 1) RED WIRE - 12V Battery or Ignition Lead 2) BLACK WIRE - Ground Lead 3) ORANGE WIRE - Remote Amp Turn-on Lead 4) USB - Amp Charging Output Lead 5) RED RCA - Right Channel Audio Output Lead 6) WHITE RCA - Left Channel Audio Output Lead 7) RCA to 3.5mm Adapter - Use if your amp has 3.5mm Input...
- Page 6 BLUETOOTH PAIRING AND OPERATION 1) Turn the XL-50BT on by pressing the power button, there will be an audible beep to confirm the XL-50BT is on. 2) Press the Bluetooth button momentarily and you will hear an audible sequence of tones to confirm XL-50BT is now ready to pair with your device along with flashing back lights.
- Page 7 Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for PowerBass any other liability in connection with the sale of this product.