Display (eDP) cable
Removing the display cable
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
c
display assembly
d
display cover
3
To remove the display cable:
a
Peel the adhesive tapes [1] [2].
b Disconnect the sensor board cable from the display panel [3].
c
Open the latch and disconnect the display cable from the display panel [4].
d Lift the display cable away from the display panel [5].
e
Release the display cable from the routing channels [6].
32
Removing and installing components
Before working inside your
computer.