T
EST
You can enable or disable the Test Pattern by selecting Off, 1 or 2. You can also
invoke the Test Pattern 1 by pressing and holding down
control panel simultaneously for 2 seconds. You can also invoke the test pattern 2
by pressing and holding down
simultaneously for 2 seconds.
F
ACTORY
warning message below appears.
Reset items include both computer sources and video source settings.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
NOTE:
Closed caption option is available for NTSC only.
P
—
Test Pattern is used to test focus and resolution.
ATTERN
Test Pattern 1:
Test Pattern 2:
R
—
Select and press
ESET
and
and
buttons on the control panel
to reset all settings to its factory default, the
Using Your Projector
buttons on the
49